2.5Mpa Water Pressure Control Valve

Non Revenue Water Pressure Control Valve With Battery Controller installed

Non Revenue Water Pressure Management Valve Dual Adjustable Set Point Pressure Based On Instant Flow Rate Ductile Iron​

Description:

In city with DMA management, water company can use Pressure Management Valve to control the pressure of each single isolated DMA and decrease the leakage without swapping the broken pipes. In such operation, water authority can decrease the leakage rate and NRW - Non Revenue Water issue.

P26U provide two adjustable pressure reducing pilots, one set to low pressure, the other to high pressure. Under flowing conditions, the pilot reacts to small changes in pressure to control the valve position by modulating relatively steady as the pilot set points. The high pressure pilot can be isolated by means of a battery operated latching solenoid. This solenoid is controlled using a fully programmable controlled which is user set to give higher and lower pressure based on instant flow rate.

Feature:

• Flow rate condition setting.

• Reduces system pressure when not needed (low flow demand), supplies increased pressure when required (high flow demand)

• Pressure Reducing Valve with two set points, high pressure and low pressure

Service Fields:

For water system, irrigation system.

Technical Data:

Size Range: DN50~DN800mm
Pressure Ratings: 1.0Mpa; 1.6Mpa; 2.5Mpa
Working Temperature:-10°C- 80°C Suitable
Media: Water
End connection: PN 10 / PN 16 / PN 25
Consult Factory for other applications
IP68 for water resistance
Comply with BS EN 1074-5, ISO 5208, BS
EN 12266-1, BS EN 558-1

Series Description:

Materials And Dimensions

DN50-DN350

Materials And Dimensions DN400-DN800