PN10 PN16 PN25 Rubber Seat Double Eccentric Butterfly Valve

Rubber Seat Double Eccentric Butterfly Valve SS316 Disc Ring

Description:

AFC's Double Eccentric Flange Butterfly Valve is a newly advanced design butterfly valve. With double eccentric design and soft rubber seal on the body, the operational toque is one of the lowest among all the butterfly valves and can be sealed in both directions,disc and stem are very strong without any deformation.

Size DN150-DN350mm,disc is flat shape, allowing bigger rubbish to flow through. DN350 to DN1200mm disc are arch shape with stronger ribs on the back, causing less compression and wearing of seal rubber to increase the life of rubber seal. Also, water head loss reduced a lot and turbulence minimized,thus flow through disc energy is saved and lowering the pumping cost.

Features:

Small platform on the valve body.
Strong protection-keep the sleeve bearing fully in the hole.
No harm to the bearing during operation.

Special Bearing:

Carbon Steel base coated with bronze + PTFE interior for lubricant and tin exterior to prevent rusty.

Stronger than bronze bearing and last longer

Online repairing by EPOXY:

The user only needs to repair the rubber seal from the exterior of the butterfly valve without going into the pipeline. The total repairing time could be around less than 1 hr for all kinds of the size.

Arch shape disc design :

Reduce head loss and minimize turbulence
Flow thru disc-energy saving, lower pumping cost


Rubber Seat:

Epoxy injected on the backside of groove

Dovetail design can tight the rubber seal
Multi ribs on the seal-reduce operation torque
Seal fixed in the groove and epoxy on the back side as a wedge, no worry of loosen
No need bolting and permanent positioned , decrease nut loose & hole rusting


Operation Torque list for your reference:

Materials:

Dimension: